Category Archives: De-candling

De-candling and Stuff!

De-candling and Stuff!

Now that Summer is in full swing, we’re moving away from the deciduous into the Black/Red Pine work.  During the Summer is the time we start to de-candle the many Black/Red Pines we have here at Aichien.  For new and seasoned Bonsai enthusiast, the concept of de-candling can be or still be confusing and misunderstood.  Black/Red Pines in general are more difficult to work on because of balancing issues and one of the most difficult trees to balance.  In this post, I’m going to talk about the concept of de-candling, when it’s applied, the results and the other details surrounding the concept.  I will also talk a bit about cutting back and thinning of the tree as well.  Of course, I’ll be sharing some pictures of the process.  This is by no means the definitive guide to de-candling which is normally best taught by a trained and skilled instructor besides you, but this will give you an idea of what it’s all about.

This is a large Black Pine that I de-candled at the beginning of June.  Just one of many…

What is De-candling, Some Terms and How it Works?

De-candling is the removal of new growth on Black/Red Pines during the Summer.  De-candling is a very stressful process for the tree so be sure to only de-candle trees that healthy and growing well.  Think about it for a second, we’re going to be removing all new growths from the tree.  Most trees don’t like that! :op  It just turns out that Black/Red pines are able to respond to that process and survive.

De-candling can be done on a Black/Red pine for 1 or all 3 of the following reasons:

1. Branch Division – new buds will appear and grow at the base of the cut creating a division in the branch structure.

2. Short internodes and Shorter needles – since the candle is cut in the middle of Summer, the new candles that grow will only have the rest of the Summer and Fall to grow.  The growing season is essitenally cut in half, the new candles will have a shorter season for growing, resulting in shorter internodes and needles.

3. Back-budding – by removing the candles and putting stress on the tree, the tree will produce buds at the cut point and along the branches as well to recover and survive.  On Black/Red pines, branches that are older than 4-5 years old tend not back bud as easily.  If there is bark on the branch, it will almost never bud in that area.

I would add, “balance,” to the list but everything we do in Bonsai revolves around balance so it’s pretty much a give in.  ;o)

Some Terms:

Spring candles – New growth at the start of the Spring season.

Spring needles – Needles that extend from the Spring candle

Summer candles – New candles that grow during the Summer and Fall because of the De-candling process.

Summer needles – Needles that extend from the Summer candle

Internode – section of the candle that has no needles

Four new Spring candles growing in a strong area.  Most areas grow just one candle.

Here is the same area with all the Spring candles cut off.  It is important to cut off all the candles because it will force the tree to produce new buds.  If we only cut the big center candle off and left the others, they would continue to grow instead and will not give us the desired results of de-candling.  At this point, we’re now left with last years Spring candle/needles (this old candle was not de-candled last year).

Since last years Spring needles are still producing lots of food for the area, we have to reduce the strength so that the new Summer candles don’t grow too strong.  What we did was pulled off most of last years Spring needles down to about 5 pairs.  Normally, last years Spring needles would have been pulled during the last Winter or early Spring of this year.  Since we didn’t get to it then, we’re doing it now.  Ideally though, the best time to pull needles is early Spring of this year.

Here is a pictures of a branch that was de-candled about four weeks ago.  Notice the two Summer candle buds starting to grow from the base of the cut.

Here’s another candles that was cut during the same time but producing three buds.  Depending on the strength of the area, we can get 1 new bud or as many as 4+.

The Process

About three weeks ago, I was tasked to de-candle this Root over Rock Black Pine.  It’s pretty big and heavy so I just did the work outside.

Working outside isn’t too bad because it was a cool June day and I had company!  Did you know that June in Japan is considered the rainy season?  The high temps are around 21-27 C (70-80 F).  Many times it’s cloudy.

When de-candling, we start at the top of the tree so that gravity can aid us in our work.  Last years Summer needles have been pulled already on this tree.  On this branch, there are two candles that need to be cut.  Sometimes a secondary candle can be very small.  It’s important to cut these candles as well.  Sometimes the secondary candle can only have one needle sticking out of it.  It’s important to get those too.

First I cut the small secondary candle.

Next I cut off the main center candle.  I performed this task on the rest of the tree using sharp scissors.

While we’re de-candling, if we find branches that needs to be cut back, we can go ahead and do those cuts as well.  Here is an example of a strong branch growing on top of a weaker branch.  If left this way, the top branch will continue to get stronger whereas the bottom branch will continue to get weaker.  Since this tree is well-developed and we don’t need the length or the strength of the strong branch, this is a good time to cut.

Here is the area with the strong branch cut off.  Now the smaller branch will have room to grow well and fill in the area.  This sort of cutting is mainly used to maintain the shape of a tree.

On this tree, there is a lower branch that was weak and allowed to run.  Now the branches are nice and strong.  I decided to put some wire on the main branches just to fan all the new growth out and give the smaller interior branches more room to grow and develop.

I quickly applied some wires to the main branches.  I did not de-candle this area so that it can continue to get stronger.  Once the interior branches develop more over this year and next, the terminal ends that are really strong will be cut back to smaller branches.

Note on Wiring

Assuming that the tree is healthy, wiring can be done on a Black/Red pine after de-candling.  Heavy bending can be done as well but more care has to be taken not to twist branches too much because the cambium layer can separated from the heartwood easily during the growing season.

Wiring can be very stressful to the tree as well.  When an entire tree is wired (strong, medium and weak areas) the tree tends to take the stress well.  If only certain areas are wired, this can cause a lot of imbalance with the tree, especially if the wired areas are weak.  Since weak areas are under a lot of stress whereas the strong areas are not, this could more times than not, cause the weak wired branch to die off.  Trees always want to get bigger and grow stronger.  If the tree finds that the strong areas are growing well and the weak areas are under stress all the time, the tree will cut off flow to the weak areas and dedicate its energy to the strong areas instead.

In this case, the entire tree was de-candled causing stress overall, and the weaker lower branch that was wired was not de-candled so the stress is limited.  By keeping the work (stress) on the tree more balanced, the overall tree will grow more even.

Often times, when working on any tree, there will be a weak branch that I want to positioned in a sunny area.  Mr. Tanaka would tell me that if I only wired that branch, there is a 50/50 chance it will die, whereas the chance of living increases, if the entire tree was wired. Sometimes people will tie a rope to those branches to move them instead to create less stress.

Here is the tree after the de-candling and some light cut back.

Lets Compromise

De-candling isn’t an all or nothing process.  Depending on the tree and the varying degree of strengths, some areas may be de-candled and other not.

In this photo, you can see on the right is a branch that was de-candled.  You can even see a small green bud starting to appear at the base.  On the left side of the picture (interior of the tree) you can see the candles still intact.  Many times when de-candling a Black/Red Pine, we don’t always de-candle everything.  Areas that are too weak will be untouched to allow them to get stronger whereas the stronger areas get de-candled.  By doing this, we allow the weak areas to get stronger and the strong areas to get weaker resulting in a tree that is growing more balanced from branch to branch.

I’m sure there is about a million of these photos out there, but I’ll give it a shot.  Here are some example of different strength candles on the same tree.  Judging the strength of the tree is very much relative to itself.  A tree with small Spring candles, relative to the tree next to it doesn’t always mean it’s weak.

For example, if you’re working on a tree and every branch pad has strong candles (candle on the right of the photo) except for one branch pad that  has weaker  small candles (candle on the left of the photo), what should you do?  In that case, the weak pad should not be de-candled because relative to the rest of the tree, it is very weak.  If the whole tree has medium size candles all over, then it’s safe to de-candle everything.  Of course, there is a point where small candles on the entire tree just means the whole tree is weak and should not be de-candled at all.

Just To Make Things More Complex

De-candling is pretty straight forward right?  Well not exactly.  Remember when I said that Black Pines are one of the most difficult trees to balance?  De-candling can play a huge part in that.  Depending on the individual bonsai professional, different techniques of de-candling can vary greatly.  All of them will have their reasons for their methods and many times the different techniques yield the same results anyways!  Sometimes it just comes down to personal taste and preference.  I’ve even come up with my own preferred way to de-candle as well!

What I’ve shown above about de-candling is the basic concept.  The technique can get more complex from there on.  I’m not going to get into the other different techniques too much but here are some basic information about them:

1. 10-10-10 method – de-candle the weak candles first, 10 days later the medium candles, then 10 days later, the stronger candles.  This method is used with the idea that cutting the weaker areas first, will give the new buds an advantage in time to catch up with the stronger areas before they start to push new growth.

2. 10-10-10 Plus method (I coined that term myself because I don’t know of a name for it) – The technique is the same as 10-10-10 method, except when de-candling the weak candles, the professional will go and pull off the new needles from the new Spring candle in the strong areas as well.  So now you have a tree where the weak candles are cut, the medium candles are intact with needles and the strong candles are intact but with no needles.  10 days later the medium candles are cut and 10 days after that, the strong needle-less candles are cut.  Not so much as a different method as the first, but a modified version.  The idea behind this technique is to greatly reduce the strength of the strong candles.

3. Peg or Neck method – depending on the strength of the candle, part of the candle internode is left and acts a fuse to when the buds at the base of the candle will form.  The stronger the area, the longer the internode (peg/neck) is left on.  The idea behind this method is that the weak areas have no neck and will start to develop buds first, whereas the strong areas that have necks will need to dry up first before it start to produce buds, giving the weaker areas a head start.

4. Needle reduction method – Every candle is de-candle all the way to the base of the candle.  Then based on strength of the area, old needles will be reduced to a certain count.  The strong areas may only have 5 pairs of old needles whereas the weak areas will have 9 pairs of needles.  The idea behind this method is that by reducing or providing food (needles) in an area will weaken or strengthen the new Summer candles to achieve balance.

5. Combination method – methods 3 and 4 are combined, usually because the tree is so imbalanced that one method alone won’t do the job.

So all these methods to achieve pretty much the same desired goal, “BALANCE.”  If bonsai people took that much time to come up with all these techniques this whole balance concept must be important.  ;o)  In the future as I get more photos of the different techniques, I’ll post supplemental information in regards to de-candling and the results

Thinning 

Thinning a tree can be a very complex procedure.  There are so many variables involved in understanding which branch to keep and which branch to cut.  Variables such as branch strength, length, and size are some examples.  Learning to thin a tree or cut back a tree is not something that is easily learned by reading a book or even reading this blog!  Haha!  This skill is learned through deeper understanding of bonsai, experience working on trees that need thinning and is usually best taught by an instructor (Lets be real, skill is usually learned best through an instructor).  So instead of trying to teach the concept of thinning and all its variables, I will provide some examples just so you can get an idea of what it’s all about.

After de-candling for many years, there is a point where the tree becomes too dense.  As there are more and more branches, the food gets divided more and more to the point where the tree could become week because there isn’t enough food to feed every branch well.  At that point, the tree needs to be thinned.  Thinned out meaning, removing branches (you know, the branches we worked so hard in growing!).  Here is an example of a younger Black Pine that is getting too dense.

Here is a shot of one branch pad

Here is the same pad after de-candling.  Still pretty dense huh?  Since the branches are de-candled, we can expect the area to get even denser once the Summer candles start to grow.

Here is the same pad after I thinned it out.  Now more sunlight gets in and there is room for the Summer candles to grow.

Here is an example of what I do when I’m thinning.  Imagine this branch within a crowded branch pad.  Which to cut?  We need to make room somewhere.

Sometimes I will de-candle the branches to get a better view of the situation.

Here is the branch after I cut two of the four branches.  Note how both branches left are about equal in strength (balance) and spread apart with nice spacing in between.  Many times we always hear about how we want to reduce buds down to two.  Once Pines develop enough branches, it turns out that the desired count is only one.  One bud for one branch.  At first, the process of thinning is slow and difficult, but with more experience, thought and variables just zip through your mind and you’re cutting away!

So When Should I De-candle?

Depending on your weather pattern and tree size, de-candling times will vary.

Large trees vs. small trees

Since de-candling allows us to have shorter than normal needle lengths, we can play around with it a bit depending on the tree size.  Large trees should have longer needles and smaller trees should have shorter needles.  This helps in making the tree more proportionate looking.  Since we know that by de-candling we will produce shorter needles, which trees to be de-candle first?  Large or small?  Thinking about it now…

While you’re thinking about the answer, here is a shot of Mark, a visiting apprentice from Australia with a very large Red Pine.

Answer? Large ones first!  Reason is because we need the large trees to have longer needles so we have to give them a longer growing season for the needles to grow, hence, de-candling them earlier in the Summer.  Usually small trees are de-candled towards the end of the de-candling period.

Long vs. Short Summer and Fall

In Japan, De-candling normally starts at the end of June for large trees and ends at the end of July for small trees.  Japan has a fairly long and humid Summer and Fall season.  By December, the new Summer candles will have fully grown with short needles and have hardened off.  In the California Bay Area,where the growing season is longer but less humid, the de-candling process starts at the beginning of June and ends at the beginning of July for small trees.  That gives you an idea of how humid is a big player in how well trees grow.

So thinking about what your weather is like in your area to figure out when you should de-candle your trees.  If you’re not sure, start a little earlier such as the beginning of June or late May and see how the tree responds.  If the Summer candles needles grow too long this year, next year when de-candling adjust your timeframe forward by a week or two.  If the Summer candles and needles are too short, then adjust next year’s timeframe back a week or two.  After two to three seasons of de-candling, you should be able to get a pretty good idea of when is the best time for you.

Is My Tree Ready or Can Handle De-candling?

Now that we have an idea of what de-candling is all about, do we go out and de-candle every Black/Red Pine we see?  I think you know the answer to that by now… ;o)

Since de-candling is stressful to the tree, it’s important to understand that only strong healthy trees that have been more developed should be de-candled.

Here is a tree that is ready for de-candling.  The trunk and main branch structures are finished and it’s all about ramification at this point.  Also, the strength of the current strong candles shows us that the tree can handle the stress of de-candling.

Here’s a tree that is on the weaker side.  Note how the tree is sparse and the Spring candles are small.  This tree will not be de-candled this year.  Next year when the tree is stronger, we can then go ahead with the de-candling.

The biggest reason why weak trees should not be de-candled is because weak trees will not respond to it well.  Instead of producing Summer candles, the tree will either produce only small buds that will sit till next year to grow, or the branches will do nothing and start to die off.  This tree was also repotted this year so it’s already gone through a good amount of stress.

When To Fertilize

Fertilizing is very important when De-candling Black/Red Pines.  Fertilizing should start at the beginning of the Spring season.  We want to feed the tree well to make them nice and strong before we de-candle the tree.  After de-candling, all fertilizers are removed and even the top soil is scrapped off and replaced. Fertilizing should stop for about 4-5 weeks after de-candling, then resumed moderately once the new Summer candles start to grow.  If we started to feed the tree heavy after the 4-5 week break, we run the risk of the new Summer candles growing just as big as the Spring candles, defeating the purpose of de-candling. If we continue feeding heavily right after de-candling, the roots could potentially burn because the tree can’t take that much food anymore and the soil becomes too toxic with nutrients.  This is the same as if we were to dump a bunch of food on the soil after freshly repotting a tree.

Here’s a Black Pine at a customer’s house that I was tasked to de-candle.  Before I started, I was told that this tree might be submitted into the next Kokufu-ten show!  How cool!  Of course, now the pressure is on.  Haha!

Here’s the tree after de-candling and light cut back.  Once the tree fills back up again with Summer candles, it should look nice and full again.  If the customer really does decided to put this tree into Kokufu, the tree would then be cleaned up, branches adjusted, lightly thinned for evenness and repotted into a more suitable pot.

Well, that’s about all I have to say about de-candling at this point in time.  I hope that this information gives you more insight to the process and why it’s done.  Black/Red Pines are so fascinating to me because of its beauty and complexity.  Balancing them is like a mystery that needs solving and it turns out that the answers are mysteries in themselves!  I’ve said this before and I still say again today, if a person can balance Black/Red pines, that person can balance any tree.

Thanks for reading!

What’s to Come!

Soon I will be posting some trees that I’ve worked on as well as more information about ceramics that I promised in the past.  Stay tuned because I have lots of information and photos just for you!

Another Milestone

Currently, there is 713 people subscribed to the blog!  That is incredible and more than I’ve ever imagined!  When I first started this blog and told Mr. Tanaka I got my first 100 subscribers, he would jokingly says, a 1000 would be better.  Well, at this rate, it seems like its only a matter of time!  Thank you to all the supporters, subscribers and readers of the blog!  I hope you’ve  enjoyed all the post and I’ll keep them coming!  Take care and try to stay cool this Summer!

 ——————————————————————————————-

P.S. If you are actively reading this blog, I would appreciate it if you subscribe to it (right column of the blog).  This is one of the best ways for me to know how many people are reading.  Thanks!

*Your Support*

If you are happy with the contents of this site and would like to show support, please click here or the, “Your Support,” tab in the menu for more information on how you can help me maintain this site and my apprenticeship.  Thanks!

Tagged , , , , , , ,